optoway trml-7100cg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 1 trml-7100cg / TRML-7100ACG 3.3v / 850 nm / 1.25 gbps rohs compliant sff lc multi-mode transceiver ********************************************************************************************************************************************************************** features l duplex lc multi-mode transceiver l compliant with ieee 802.3z 1000base-sx l compliant with fibre channel fc-ph-2 for 100-m5-sn-1 and 100-m6-sn-1 l 300 m links with 62.5/125 m m mmf cables l 500 m links with 50/125 m m mmf cables l small form factor 2x5 pin package l ac/ac coupled signal input / output l lvttl transmitter disable input l lvttl signal detect output l single +3.3 v power supply l rohs compliant l 0 to 70 o c operation : trml-7100cg l -20 to 85 o c operation : TRML-7100ACG l wave solderable and aqueous washable l class 1 laser international safety standard iec-60825 compliant applications l sonet/sdh equipment interconnect l gigabit ethernet 1.25 gb/s links description the trml-7100cg series multi-mode transceivers is small form factor, low power, high performance module for bi-directional serial optical data communications such as gigabit ethernet ieee 802.3z 1000base-sx and fiber channel fc-ph-2. this module is designed for multi-mode fiber and operates at a nominal wavelength of 850 nm. the transmitter section uses a multiple quantum well 850 nm vcsel and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated gaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. a pecl logic interface simplifies interface to external circuitry. laser safety this multi-mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) 1000 base distance (m) wavelength (nm) package temp. ( o c) tx power (dbm) rx sens. (dbm) rohs compliant trml-7100cg 1.25/1.063 sx 300/500* 850 2x5 lc 0 to 70 -4 to -9 -17 yes TRML-7100ACG 1.25/1.063 sx 300/500* 850 2x5 lc -20 to 85 -4 to -9 -17 yes note: 300 m links with 62.5/125 m m mmf cables and 500 m links with 62.5/125 m m mmf cables. absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c operating temperature topr 0 -20 70 85 o c trml-7100cg TRML-7100ACG soldering temperature --- 260 o c 10 seconds on leads only power supply voltage vcc 0 4.5 v input voltage --- gnd vcc v output current iout 0 30 ma recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.13 3.3 3.47 v operating temperature topr 0 -20 70 85 o c / trml-7100cg o c / TRML-7100ACG data rate 1000 1250 mb/s power supply current icc 180 250 ma
optoway trml-7100cg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 2 transmitter specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical optical transmit power po -9 --- -4 dbm 1 output center wavelength l 830 850 860 nm output spectrum width dl --- --- 0.85 nm rms ( ) extinction ratio e r 9 --- --- db output eye compliant with ieee 802.3z optical rise time t r 0.26 ns 20% to 80% values optical fall time t f 0.26 ns 20% to 80% values relative intensity noise rin -116 db/hz total jitter tj 0.226 ns 2 electrical data input current C low i il -350 m a data input current C high i ih 350 m a differential input voltage v ih - v il 300 mv data input voltage C low v il - v cc -2.0 -1.58 v 3 data input voltage -- high v ih - v cc -1.1 -0.74 v 3 disable input voltage -- low v tdis,l 0 0.8 v tx output enabled disable input voltage -- high v tdis,h vcc C 1.3 vcc v tx ouput disabled shut off time for txdis t dis 1 ms notes: 1. output power is power coupled into a 62.5/125 m m mm fiber. 2. measured with a 2 7 -1 prbs. 3. these inputs are compatible with 10k, 10kh and 100k ecl and pecl inputs. receiver specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes optical sensitivity --- --- --- -17 dbm 1 maximum input power pin -3 0 --- dbm signal detect -- asserted pa --- --- -17 dbm transition: low to high signal detect -- deasserted pd -31 --- --- dbm transition: high to low signal detect -- hysteresis 1.0 --- db wavelength of operation 1100 --- 1600 nm electrical data output voltage C low v ol - v cc -2.0 -1.58 v 2 data output voltage C high v oh - v cc -1.1 -0.74 v 2 signal detect output voltage -- low v ol 0.5 v signal detect output voltage -- high v oh 2.0 v notes: 1. minimum sensitivity and saturation levels at ber=1e-12 for a 2 7 -1 prbs. 2. these outputs are compatible with 10k, 10kh and 100k ecl and pecl outputs.
optoway trml-7100cg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 3 connection diagram pin symbol notes 1 v ee r directly connect this pin to the receiver ground plane 2 v cc r +3.3v dc power for the receiver section 3 sd active high on this indicates a received optical signal. 4 rd - receiver dataout bar. see recommended circuit schematic 5 rd+ receiver dataout. see recommended circuit schematic 6 v cc t +3.3v dc power for the transmitter section 7 v ee t directly connect this plan to the transmitter ground plane 8 tdis transmitter disable. connect this pin to +3.3v ttl logic 1 to disable module to enable module connect to ttl logic low 0 9 td+ transmitter data in. see recommended circuit schematic 10 td- transmitter data in bar. see recommended circuit schematic ms ms mounting studs. connect to chassis ground recommended circuit schematic v e e r 1 v c c r 2 s d 3 r d - 4 r d + 5 v c c t 6 v e e t 7 t d i s 8 t d + 9 t d - 1 0 txdis(lvttl) z=5or z=50r 1uh 10uf 10nf 10uf 10nf vcc3.3v 1uh 10uf 10nf z=5or z=50r phy device td- td+ rd+ rd- sd 100r vcc3.3v lvpecl vcc3.3v lvpecl to lvttl stage note: 1. no sd pull-down resistor required for trml-7100cg (lvttl sd output) 2. veer and veet are not internally connected to each other. 3. 50 line pattern and component placements on td+/td- and rd+/rd- lines shall be symmetrical for better impedance matching.
optoway trml-7100cg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2005 v2.0 4 package diagram units in mm 1) standard case trml-7100cg / TRML-7100ACG 2) extended case trml-7100ceg / trml-7100aceg note: specifications subject to change without notice.
|
